ACCURATE ATTENUATION CORRECTION FOR ALGEBRAIC RECONSTRUCTION TECHNIQUE IN SPECT

We present a new iterative reconstruction algorithm to improve the algebraic reconstruction technique （ART） for the Single-Photon Emission Computed Tomography. Our method is a generalization of the Kaczmarz iterative algorithm for solving linear systems of equations and introduces exact and implicit attenuation correction derived from the attenuated Radon transform operator at each step of the algorithm. The performances of the presented algorithm have been tested upon various numerical experiments in presence of both strongly non-uniform attenuation and incomplete measurements data. We also tested the ability of our algorithm to handle moderate noisy data. Simulation studies demonstrate that the proposed method has a significant improvement in the quality of reconstructed images over ART. Moreover, convergence speed was improved and stability was established, facing noisy data, once we incorporate filtration procedure in our algorithm.     

An Improved Time-Saving Synthesis for [11CMethyl] Iodide

[¹¹]CMethyliodide is a key to a large scale of ¹¹C-PET-radiopharmaceuticals. A method was devised for its efficient production in a yield between 85 and 90% within 7 minutes only. The use of tetrahydrofuran (THF) opens the possibility to absorb the starting [¹¹C]CO₂ at room temperature. The methyl iodide generation from its precursor can be achieved in THF directly or in aqueous solution.

Es wird die Mögliclikeit gezeigt, [¹¹C]Mthyliodid, einer Schlüssclverbindung der ¹¹C-Chemie, innerhalb von nur 7 Minuten in Ausbeuten zwischen 85 und 90% herzustellen. Die Verwendung von Tetrahydrofuran als Lösungsmittel anstelle von Diethylether ermöglicht die vollständige Absorption des Ausgangs- [¹¹C]C0₂ bei Raumtemperatur. Die Umsetzung des Vorproduktes zum Alelhyliodid kann wahlweise direkt in Tetrahydrofuran oder in wäβriger Lösung vorgenommen werden.     

快速多极边界元法用于扩散光学断层成像研究

在求解扩散光学断层成像中的正向问题时, 目前普遍采用有限元法, 但是随着实际模型规模的增大, 有限元法的计算量问题日益显著, 而边界元法则由于可以降低计算维度使计算量减少而备受关注. 本文以均匀的高散射介质为模型, 研究了将快速多极边界元法用于扩散光学断层成像的正向问题. 快速多极边界元法利用核函数的多极展开, 将常规边界元法中系数矩阵和迭代矢量的乘积项等价为相应四叉树结构的一次递归, 再结合广义最小残量法进行迭代求解. 将计算结果和蒙特卡罗法的模拟结果进行了比较, 表明利用快速多极边界元法的模拟结果和蒙特卡罗法的结果有很好的一致性. 研究结果验证了快速多极边界元法可以用于扩散光学断层成像, 为其大规模和实时成像带来可观的前景. 关键词： 扩散光学断层成像 边界元法 快速多极边界元法     

星对星激光雷达反射层析成像技术探讨

以星对星激光雷达成像为应用背景,提出了一种基于啁啾脉冲信号的反射层析成像处理方法,该方法通过激光雷达多角度回波非相干累积实现高分辨率的图像重构;分析了星对星反射层析成像的实现条件,包括成像分辨率、工作模式及成像时间.研究结果表明,采用本文所提出的成像方法,通过同轨道面的伴星探测方式可以满足激光雷达反射层析成像多角度探测的要求,在观测角度范围大于60°时能够得到0.1 m目标分辨率,角度范围越大,分辨率越高,且成像时间与卫星轨道半径和两星距离有关.实验验证了该方法的有效性和星对星反射层析成像的可行性.     

Radiolabeled Nanogels for Nuclear Molecular Imaging

An efficient and simple synthesis approach to form stable ⁶⁸Ga‐labeled nanogels is reported and their fundamental properties investigated. Nanogels are obtained by self‐assembly of amphiphilic statistical prepolymers derivatised with chelating groups for radiometals. The resulting nanogels exhibit a well‐defined spherical shape with a diameter of 290 ± 50 nm. The radionuclide ⁶⁸Ga is chelated in high radiochemical yields in an aqueous medium at room temperature. The phagocytosis assay demonstrates a highly increased internalization of nanogels by activated macrophages. Access to these ⁶⁸Ga‐nanogels will allow the investigation of general behavior and clearance pathways of nanogels in vivo by nuclear molecular imaging.

     

基于法布里-珀罗调谐滤波器的傅里叶域锁模扫频激光光源

报道了一个光纤型1300 nm波段的傅里叶域锁模(Fourier domain mode locking, FDML)扫频激光光源, 用于扫频光学相干层析成像技术 (optical coherence tomography, OCT) 成像. 本实验扫频激光光源采用包含增益介质、调谐滤波器和延迟线组成的长腔激光谐振腔以及光功率增强单元. FDML扫频激光光源具有快速和高度稳定运转模式, 相位稳定性好. 基于法布里-珀罗调谐滤波器(fiber Fabry-Perot tunable filter, FFP-TF)的FDML扫频激光光源扫频范围为130 nm, 半高全宽为70 nm, 输出平均功率是11 mW. 与基于FFP-TF的短腔的扫频光源做了对比研究, FDML扫频光源速度从短腔的8 kHz提高到了48.12 kHz, 对应生物组织OCT成像轴向分辨率为7.8 μm, 比短腔的减小了1.9 μm. 关键词： 光学相干层析技术 扫频激光光源 傅里叶域锁模 法布里-珀罗调谐滤波器     

Analyzing radiation absorption difference of dental substance by using Dual CT

The purpose of this study was to evaluate the changes of noise and computer tomography (CT) number in each dental substance, by using the metal artefact reduction algorithm; we used dual CT for this study. For the study, we produced resin, titanium, gypsum, and wax that are widely used by dentists. In addition, we made nickel to increase the artefact. While making the study materials, we made sure that there is no difficulty when inserting the substances inside phantom. In order to study, we scanned before and after using the metal artefact reduction algorithm. We conducted an average analysis of CT number and noise, before and after using the metal artefact reduction algorithm. As a result, there was no difference in CT number and noise before and after using the metal artefact reduction algorithm. However, when it comes to the noise value in each substance, wax's noise value was the lowest whereas titanium's noise value was the highest, after applying the metal artefact reduction algorithm. In nickel, CT number and noise value from artefact area showed a decreased noise value when applying the metal artefact reduction algorithm. In conclusion, we assumed that we could increase the effectiveness of CT examination by applying dual energy's metal artefact reduction algorithm.     

Investigation of Cr-atom clustering in Fe‒Cr model alloys under irradiation

Irradiation-induced microstructure in Fe?Cr model alloys, 0.5 MeV-He ion-irradiated at room temperature, was investigated by atom probe tomography (APT). The APT results showed the formation of Cr-atom clustering depending on the ion-penetration depth. Although the Cr-atom clustering was observed in the irradiation damaged zone, this effect was not dominant in the less-damaged zone. In addition, we performed computer simulations using the Metropolis–Monte Carlo (MMC) method for investigating the tendency to form Cr-atom clustering in binary Fe?Cr alloys. The simulation results revealed the formation of Cr-atom clustering. The degree of Cr-atom clustering for the APT analysis and the MMC simulation was verified by plotting the Cr?Cr radiation distribution function. It was found that the number of Cr atoms, located in the first and second nearest-neighboring sites, increased significantly. Both results support the formation of Cr-clustering, which is believed to be a source of radiation hardening. The application of two techniques, APT and the MMC simulation, provided complementary information on the radiation-induced microstructure.     

A globally convergent numerical method for an inverse elliptic problem of optical tomography

A new globally convergent numerical method is developed for an inverse problem for the elliptic equation with the unknown potential. The boundary data simulating measurements in optical tomography are generated by the running source. Global convergence analysis is presented along with numerical experiments.